pressure max. 10 bar, electric power 3 kW, compressed air tank

 

mobile

 

serial no. 425, power 800 W, delivery height 40 mm, delivery rate 3,300 l / h

 

machine no. 284-281, welding power 280 A / 28 V, hose package, pressure reducer (without gas bottle)

 

D / H 800 x 3,000 mm, 6 levels, (without contents)

 

load capacity 1,200 kg, duplex mast, lifting height approx. 3,000 mm, charger DETA Ferrotron, 220 V, operating hours. 7,592 (later release on July 31)

 

defekt

 

serial no. 4113, speed max. 720 rpm, 2 gear stages, feed 0.09 - 0.28 mm / rev, drill vice, keyless chuck, lot of twist drill

 

crimper, steel tape dispenser, tin snips, lot of edge protection

 

load capacity 2,000 kg

 

serial no. 5088, control HURCO Ultimax 4, 3 axes, table size. 1,500 x 660 mm, travel X / Y / Z 1,270 x 660 x 610 mm, spindle speed max. 8,000 rpm, 24-fold tool changer, tool holder SK40, coolant system, oil cooler, chip conveyor, central lubrication, lot of tool holders SK40, 3D measuring probe, lot of clamping devices

 

consisting of: 30 tool holders SK40 equipped, indexable inserts, reamers, twist drills, end mills, set-up tools, clamping devices, high-pressure machine vice, jaw width 125 mm

 

2,000 x 700 mm, vice, profile iron shelf, 3 levels, tool cabinet, 2-door, gray / blue, contents: 2 electric Hand machines, 3 cutter heads, hand tools, end mills, taps

 

serial no. 275583, travel X / Y / Z 1,220 x 820 x 610 mm, table load max.6,500 kg, tool changer, 30-fold, tool holder SK50, switch and control cabinet, angle milling head, fork milling head, 2 axes RÖHM, WTS shelf, 90 tool holders, SK50 equipped, profile iron shelf, 3 - 4 levels, contents: clamping device

 

machine no. 63009/2, equipment table, tool assembly aid

 

consisting of: 2 drawer cabinets, 3/7 pull-outs, contents: twist drill, end mill, face milling cutter, tapping chuck with quick-change inserts, tool plug-in system WOHLHAUPTER multi-drill

 

load capacity approx. 500 kg, crane gripper SIEGERT GZG, load capacity 500 kg, gripping range 115 - 260 mm

 

2-door, W / D / H 1,100 x 500 x 1,800 mm, contents: indexable inserts, twist drills, end mills, tool holders SK40

 

overhang 490 mm, table size 660 x 660 mm

 

3 axes, travel X / Y / Z 450 x 410 x 520 mm, PC control, straight grinder KRESS, clamping plate, 1,500 x 700 mm